fbpx
Your first step to recovery

Piriformis Syndrome

Piriformis syndrome refers to the dysfunction of the piriformis muscle which irritates the sciatic nerve. It is characterized by deep buttock region pain that radiates down leg and foot often accompanied by pins and needles and numbness traveling along the path of the sciatic nerve.

The simplistic reason for this widely distributed pain comes down to the piriformis muscle itself – Their close proximity means that direct trauma to the buttock region or the supporting structures can result in inflammation and muscle dysfunction which can compress and irritate the sciatic resulting in referred symptoms.

Piriformis syndrome symptoms may include:

  • Localised deep buttock region pain
  • Pain with continuous sitting or standing for 15 mins or over
  • Pins and needles along the leg down to the outer foot
  • Numbness in outer leg or foot (often resolves on movements)
  • Deep squatting or bending
  • Pain on direct palpation

Anatomy

 

The piriformis muscle originates from the outer surface of a large fused bone of our pelvis called the sacrum. It travels adjacently and inserts into the top of the hip joint. The piriformis muscle is a very active muscle involved in stabilizing the hip and pelvis during majority of our activities (walking, running, standing, sitting or standing, turning in bed). When the piriformis muscle contracts it helps the hip rotate outwards (external rotation) and lift thigh out and up (abduct).

The sciatic nerve originates from where the very base of the spine and the sacrum join known as the lumbosacral region (lower back and saddle region). In this region five separate branches of nerves travel outside of the bony openings of the spine called the nerve roots and connect into a single large nerve – the sciatic nerve. It then travels through the pelvis deep into the buttock region close proximity the piriformis and gluteal muscles. In some individuals the piriformis muscles can travel through the piriformis muscle subjecting them to piriformis syndrome.

Diagnosis

There are no specific tests to diagnose piriformis syndrome. Diagnosis of piriformis syndrome is made by the report of symptoms and by physical exam using a variety of movements to elicit pain to the piriformis muscle. In some cases, a contracted or tender piriformis muscle can be found on physical exam.

In cases where there is underlying pathology (such as disc injury, arthritis, sacroiliac dysfunction or hip injury) resulting in true sciatica – piriformis syndrome may develop to become an additional muscular dysfunction that is required to be addressed. Because symptoms can be similar in other conditions, radiologic tests such as MRIs may be required to rule out other causes of sciatic nerve compression, such as a herniated disc.

Consultation with a physiotherapist in this case is highly recommended as they will perform a comprehensive clinical examination to identify the root cause of your symptoms.

Exercises for piriformis syndrome

Corrective exercises with a combination of strength and flexibility regimen is an essential way to treat true piriformis syndrome (without involvement of other underlying pathologies).

The exercises outlined below follow a phase-by-phase progressive regimen to strength key muscles of the hip, buttock and legs.

As you work through these exercises expect to feel some pain during and after your exercise. Pain you may feel during the exercise is an expected sign of muscle activity. Pain you may feel after the exercises is an expected sign of muscle healing and recovery. However, if you are unable to participate in the exercises due to symptom deterioration – it is highly recommended you consult your physiotherapist to rule out other potential causes.

Otherwise, to help you gauge the correct amount of pain you should expect during exercise – use this scale. The ideal range should be 2 to 5. If your baseline pain is over 6 or 7 – it is recommended that you consult your doctor for pain relief appropriate to manage your pain, followed by a consult with a physiotherapist. Your physiotherapist will be able to modify the following exercises or prescribe alternative exercises best suited based on your current level of function and symptoms.

Symptom noting – is a great way to keep track of your progress and symptom behaviour.

  • Take a diary
  • Note down pain before you begin the exercise.
  • Note down the pain rating after each exercise.
  • Note down pain at the end of the day
  • Repeat the pain recording process for the next 4-5 days
  • Examine the trend in your symptoms.

Interference with everyday tasks – Your participation or level of exertion with everyday activities may interfere with your symptoms impacting your exercise tolerance. It is therefore important to note any of these interferences’ contributory to your pain.

Phase 1 – is a beginner stage.

This phase is intended for gently priming muscle activation. It will demand your concentration on technique and compliance to change the possible compensation your body has been used to as a result of pain. This phase can last between 1-2 weeks.

Instructions:

3 sets of 10 repetitions. Hold each repetition for 8-10 seconds. Rest 10-15 seconds between sets, 30 seconds between exercises. Do this exercise 1-2 times per day.

Bridges

 

Lie on your back.
Bend both knees and place your feet flat on the bed.
Lift your buttocks from the bed.
Place your buttocks back on the bed.
Repeat this exercise and remember to continue to breathe properly.


Clam shells

 

 

 

 

 

 

Lie on your side with your feet, ankles and knees together.
Bend the legs a little and tighten your core stability muscles.
Keeping the feet together, lift the top knee up.
Make sure you don’t roll your body back with the movement.
Control the movement as you bring the knee back down to the starting position.


Phase 2 – intermediate stage

The intermediate phase is similar to the beginner stage with the difference of using changing elements of progression to challenge the muscles capacity further. In this stage you may choose to progress the exercises by choosing to change ONE factor:

  • Increase repetitions
  • Increase hold time
  • Increase sets
  • Add appropriate resistance

Instructions:

  • 3 sets of 10-15 repetitions. Hold each repetition for 10-15 seconds.
  • Rest 10-15 seconds between sets, 30 seconds between exercises.
  • Do this exercise 1-2 times per day.

Bridges with resistance

 

 

 

 

 

 

 

Tie a resistance band around both thighs, just above your knees.
Lie on your back with your knees bent and legs hips width apart.
There should be tension in the band.
Raise your hips up into a bridge, keeping the knees hips width apart.
Control the movement back down to the start position, maintaining constant tension on the band.


Clams with resistance

Lie on your side and place a band above your knees, approximately an inch or two above the knee joint.
Bend your legs a little, keeping the feet in line with your back.
Use your core stability muscles to keep the body stable.
Keeping your feet together, lift the top knee up against the resistance of the band.
Ensure you stay on your side and do not roll your hips and your body back with the movement.
Lower the knee back down, controlling the resistance.


Phase 3 – advance stage

Body weight squats

Start position is standing straight with the arms out in front and bent at the elbows, the fists should be clenched and the palms facing inwards.
Move downwards into a squat position so that the knees are aligned over the toes and the heels are in contact with the floor, make sure the back is straight.
Keep the head and chest upright and the gaze horizontal.
Hold for 2 seconds and return to the start position.


Lunges

Stand straight with your arms to the side or on your hips.
Take a large step forwards on your affected leg, then drop your hips directly down between both feet, bending your hips and knees to a 90 degrees.
Push back up to the starting position, and repeat.
Make sure you take a large enough step that your front knee does not travel over your foot, and ensure your knee travels directly forwards.
Keep your body up straight throughout the movement.


Crab walks

Place a band around your ankles and gather some tension.
Side-step keeping constant tension on the band.
Make sure you do not bring your feet too close together and keep your toes and knees pointing forwards.


Phase 4 – return to activities

Planning on running a marathon? A sports dietitian on what to eat for  long-distance running


Stretching

Do you always need to stretch the muscle? The answer is NO. While stretching is an important tool to improve muscle elasticity. You may not always need to stretch a muscle if it is NOT tight. Thus, stretching is recommended to be limited to areas you feel are TIGHT when you perform a given movement. Check the affected side and unaffected side – don’t need to stretch a muscle that doesn’t need to be stretched.

Seated piriformis stretch 

Start in a seated position.
Cross the symptomatic leg your ankle is resting on, to the opposite knee.
Apply gentle pressure to the knee as you lean forward, increasing the depth of the stretch.
Hold this position, you should feel a comfortable tension with no pain.


Pigeon stretch

 

Start on your hands and knees.
Cross the symptomatic leg underneath you, then lower your hips down to the ground.
Rest your body forwards on your arms.
You should feel a stretch across the buttock.

 

 

 

 

 

 

Pressure on the Spine in Different Posture

Did You Know?

 

Low back pain is a common health problem which affects up to 80% of the population at some stage in their life.

 

In New Zealand ACC spends in excess of $130 million a year treating back pain related injuries.

Most back pain occurs between the ages of 25 and 60, and most typically in the 40s.

 

 

 

In an era of smart devices, posture has never been more important or harder to achieve. As technology continues to grow, sitting at a desk on a computer or on our phones is becoming more prevalent at work. Having a sedentary desk job can result in sitting for around 8 hours a day. This position actually increases the load on your spine more than standing. Spinal pressure “sits” around 140mm pressure. This pressure usually does not hurt the back right away however, builds up over time and can even change the structure structure of your spine. So, if you slouch then spinal pressure increases to 190mm; add some weight and you’ve put 275 pounds of pressure on your spine.

 

A compromised spine constricts your blood vessels and nerves, causing problems with your muscles, discs, and joints. And all of these problems can lead to headaches, fatigue, and even breathing problems. Your back is a delicate machine. When one part falls out of alignment, it can affect everything setting off a domino effect and wreak havoc throughout your back and body.

 

 


Below is a graph showing different postures and the pressure it exerts on the spine;


But, remember: While you may feel comfortable and supported in your chair and find a perfect sitting posture, staying in the same position for long periods is not healthy for your spine. Varying your postures by occasionally standing and moving around for at least a few minutes each half hour will help keep your spinal joints, muscles, tendons, and ligaments loose and pain free.

 

Stand Up for Your Spine

If you don’t have a sit-stand desk, you can still combat “sitting disease” and protect your spine. Consider these tips:

  • Do some work standing at a high table or counter.

  • Use a lumbar roll behind your back when sitting to improve seated posture

  • Set a timer on your computer for a stand-and-stretch break every 30 minutes.

  • Exercise to assist in improving body weight to lessen additional load on the spine

  • Strengthen the core to provide additional support

The focus is simple: Reduce your sitting throughout the day. But, remember that varying postures is best for your back and neck, so do not go the opposite extreme and never sit. Alternating sitting, standing and movement throughout your day is the best way you can keep your spine safe and body healthy—at work and beyond

 

Still having back pain?

Schedule an initial assessment with one of our Physiotherapists so they can determine the root of the problem.  During this assessment your physiotherapist will be able to decide whether your pain is a source of nerve root irritation, discogenic, postural related, or musculoskeletal.  After arriving with the consensus of the problem, we will be able to use many techniques to relieve the back pain.  These include: manual therapy, therapeutic exercise, and postural recommendations.

 

To find your nearest Physio Fusion clinic and book an appointment call 09 6266186 or visit our website https://physiofusion.co.nz

Lifting Mechanics

IS IT DANGEROUS TO LIFT WITH A BENT BACK?

One common belief about lifting is that rounding your back when lifting an object is considered dangerous while lifting with a straight back is considered safe…

 

 

However, there is a lot of misinformation circulating around lifting mechanics and what is deemed “good technique” versus “bad technique.”

Here are some key myths and misinformation that you may have heard:

 

A ROUNDED BACK WHILE LIFTING OVER STRESSES THE BACK MUSCLES AND LIGAMENTS

  • Research has shown that regardless of lifting position, whether you’re stooped, squatting or weightlifting, your back has to produce the same amount of force. Statistically speaking, it’s not significantly different.

 

 

FLEXING THE SPINE WHILE LIFTING INCREASES THE LOAD ON THE LUMBAR DISCS

  • Under heavy loads, discs are unlikely to fail unless >95% flexion is achieved (which is near impossible)

  • With low loads, the disc is unlikely to fail unless you do thousands of repetitions continuously

  • Your body is an amazing adapter, this includes discs! Your discs can adapt and become more and more able to handle loads when stressed appropriately

 

THESE COMPOUND TO CAUSE INJURIES AND PAIN TO THE BACK MUSCLES AND DISCS

  • Resistance training has demonstrated through countless studies the ability to increase bone mineral density (BMD) of the lumbar spine. BMD is actually positively associated with the strength of the spinal discs and ligaments at that level. With appropriate loading and training, disc, ligament, bone and muscles are going to adapt favourably

 

A NEUTRAL SPINE IS SAFER, STRONGER, MORE EFFICIENT AND BETTER TO LIFT WITH

  • There is no significant difference between activities that encourage more spinal flexion and one’s that do not in the long term

  • Lifting with lumbar flexion is not a risk factor for low back pain

  • Research has shown lifting with a bent back is more metabolically and neuromuscularly efficient

  • When the spine is in extension during bent over activities, the hip is actually flexed to a greater degree – decreasing the ability for the glutes and hamstrings to create as much internal torque. Flexing the spine reduces this effect and reduces the moment arm for the hip extensors

 

STOP BACK PAIN & INJURIES BY LIFTING WITH A NEUTRAL SPINE

  • Your lumbar spine flexes every time your hip flexes! It is impossible to isolate one versus the other. It is also impossible to not flex while doing common movements

  • Extreme flexion however (>/=100%), may pose an increased risk under heavy loads, but not at light loads

 

You may still be wondering why you have back pain (stay tuned for our next blog!). Your pain may not be directly related to your lifting strategy.

 

 

Could you have pain with forward bending? Absolutely.

Is bending at the lumbar spine an increased risk for pain or injury? In the vast majority of situations, no.

If I have pain with forward bending, is it bad to temporarily limit doing so? Not at all.

Should I fear bending at the spine with or without pain or injury? No. Being fearful of flexing/moving your spine is actually a stronger predictor of disability and back pain.

 

Work on moving through your spine, after all it’s what it is designed to do! Choose comfortable movements and gain confidence over time, then build up your strength gradually with resistance training – try and not to push too fast, we want nice, healthy adaptation! Give your body time to adapt, back pain is not quick fix sometimes but you are resilient and with healthy, normal movements and some patience, you will be okay.